MoonPoint Support Logo

 


Shop Amazon Warehouse Deals - Deep Discounts on Open-box and Used ProductsAmazon Warehouse Deals



Advanced Search
September
Sun Mon Tue Wed Thu Fri Sat
       
16
 
2016
Months
Sep


Fri, Sep 16, 2016 10:42 pm

snmptest

If you need to query a device that supports the Simple Network Management Protocol (SNMP), you can do so from a command line interface, i.e, a shell prompt, on a Mac OS X or Linux system using the snmptest tool. To use the utility, issue the snmptest command specifying the "community string", which is somewhat equivalent to a password, with the -c option, specify the version of SNMP with the -v option and then specify the IP address or fully qualified domain name (FQDN). You will get a "Variable:" prompt when you run the command. You can specify an object identifider (OID) that you wish to query at that prompt. If you hit Enter the prompt will be repeated. When you've finished entering variables you wish to query, hit Enter at the next "Variable" prompt without entering any variable. You should then see the results returned as shown below. You can hit Ctrl-C to terminate the program.

# snmptest -c SomeSecret0123 -v 1 192.168.0.11
Variable: system.sysLocation.0
Variable: system.sysContact.0
Variable:
Received Get Response from UDP: [192.168.0.11]:161->[0.0.0.0]:41231
requestid 0xAF07FC2 errstat 0x0 errindex 0x0
SNMPv2-MIB::sysLocation.0 = STRING: London
SNMPv2-MIB::sysContact.0 = STRING: John Doe
Variable: ^C
#

[ More Info ]

[/network/snmp] permanent link

Once You Know, You Newegg AliExpress by Alibaba.com

Shop Amazon Local - Subscribe to Deals in Your Neighborhood

Valid HTML 4.01 Transitional

Privacy Policy   Contact

Blosxom logo